Download Print this page

Kenwood SC5000 Instruction Manual

Hide thumbs

Advertisement

Instruction manual
Model SC5000

Advertisement

loading

  Summary of Contents for Kenwood SC5000

  • Page 1 Instruction manual Model SC5000...
  • Page 2: Use

    Fig. 1 Fig. 2 Fig. 2 Fig. 4 Fig. 3 Fig. 5 Fig. 6...
  • Page 3 This could cause the wood grain to rise. Also check use and care instructions from the floor manufacturer. Not recommended for use on CORK or CORK tiles. " Kenwood will not accept any responsibility for damage caused to flooring if the above warnings has " been ignored.
  • Page 4: Description Of The Appliance (Fig. 1)

    Dear Customer Thank you for having chosen our product and allow us to congratulate you for having purchased the STEAM MOP 5000, which has been designed in order to change the old methods of manual floor cleaning. This appliance has been designed to obtain ,not only a perfectly clean floor, but also effective sterilisation of sur- faces through the degreasing and cleaning power of steam that eliminates bacteria, microbes, mites without the use of chemicals.
  • Page 5 When KENWOOD STEAM MOP 5000 starts to release steam, you can use it by passing it slowly over the surfaces to be cleaned. When the STEAM MOP 5000 runs out of water you simply place the unit on the heating pad to avoid floor damage, then unplug the appliance and fill tank as described previously.
  • Page 6: Troubleshooting

    OF YOUR KENWOOD STEAM MOP PLEASE READ Your KENWOOD STEAM MOP is ideal for ceramic, marble, vinyl, stone, linoleum and sealed hardwood floors Please see special note below on wooden floors. The Mop produces heat and steam similar to a steam iron and can reach temperatures in excess of 95°C. Therefore DO NOT leave in one spot during use or while hot for more than 15 seconds.