Using Encoding Mode; Encoding - TrekStor i.Beat 500 User Manual

Using Encoding Mode

Encoding

1. Press and hold the MENU button. Next, search the Encoding mode with the Forward
button, Rewind button and select the 'Encoding' pressing the Play/Pause button.
You can also select the mode with the Jog key.
2. Connect one end of the line -in cable to the earphone jack or output terminal of your
audio player and connect the other end to the line -in jack on this device.
3. While the track is played, press the Rec button.
• You can convert the music into an MP3 file from your audio player,
• If the Rec button is pressed again, recording will pause.
• You can hear the music during encoding.
4. To stop recording, press the Stop button.
• The device will be set to Wait. Press the stop button again to save the file in the
ENCODING folder.
This mode allows you to receive audio signals from an
external audio player in MP3 format. You can also make
voice recordings.