Table of Contents
Advertisement
Installing the USB Driver
If you are running Windows ME, 2000, 2003, or XP on your PC, the installation will be
performed automatically when you connect this device to your PC. However, on a PC running
Windows 98SE, you will need to install the required USB driver manually. The installation
procedure is as follows:
Automatic Installation
1. Connect one end of the USB cable to your PC.
2. Turn on power to this device and connect the other end of the cable to
the USB port of this device.
3. Your PC automatically recognizes this device and the required USB
driver is installed automatically.
¦ NOTE
If the installation does not start automatically, restart your PC and repeat
the procedure above.
Manual Installation
If your PC is running Windows 98SE, you will need to install the USB driver manually.
1. Connect the device to your PC.
The Add New Hardware Wizard will appear.
2. Follow the on-screen instructions selecting 'Specify a location'.
3. Browse to the Driver_v_5.16 file on the CD-ROM.
• If the Add New Hardware Wizard is not opened automatically, find the CD-
Rom drive manually in 'My Computer'.
• For details about manual installation, refer to page 16.
Advertisement
Table of Contents
