Phone Use; Telephoning; Making A Call - SAGEMCOM C120 ECO User Manual

P
HONE USE
T
ELEPHONING
Receiving a call
• When a call is received, the phone rings.
• The call indicator flashes and the caller's phone
number is displayed on the screen if you have subscribed to
the "caller ID" service.
The caller's name may also be displayed if it is included in
your phone book.
Accepting a call in handset mode
• Pick up the phone handset. The line indicator
the call time counter is displayed on the screen.
• To end the call, hang up the handset.
Take a call in speakerphone mode
• Press to speak in speakerphone mode (without
holding the handset). The symbol
are displayed on the screen.
• To end the call, press
turns and
and the call time counter
again.
M
AKING A CALL
The call can be made in two ways:
Making a call in handset mode
• Pick up the handset. The line indicator
Dial your number on the keypad.
The call time counter is displayed on the screen.
• To end the call, hang up the handset on the base or press.
Making a call in speakerphone mode
• Press . The symbol are displayed on the screen
and the line indicator
Dial your number on the keypad. This is displayed on the
screen.
• To end the call, hang up the handset on the base or
press .
You can also dial a number in pre-dialling mode,
whether in handset or speakerphone mode: dial the
number on the keypad and then lift the handset or
press .
If necessary, you can correct the number entered by
pressing .
comes on in red.
comes on.
13