Auto Adjustment - Emerson LC320EM2 Owner's Manual

22
ECO
You can turn on ECO Mode to conserve power.
1
Use ▲/▼ to select [ECO], then press OK.
2
Use ▲/▼ to select the desired mode, then press OK.
On
Reduces power consumption
Off Sets the backlight brighter.
Note
• You must set [Home] in [Location].
Otherwise, the settings you adjusted will not be saved when the
unit goes into standby mode.
• You can also press ECO
➠ p. 14
PC Settings
This function lets you adjust the PC screen position, clock and
phase during PC input.
1
Use ▲/▼ to select [PC Settings], then press OK.
2
Use ▲/▼ to select the setting you want to adjust, then
press OK.
Picture
Sound
Setup
Features
Language
USB
3
Adjust the following items.

Auto Adjustment

Use ▲/▼ to select [Adjust], then press OK.
Picture
Sound
Setup
Features
Language
USB
• The horizontal/vertical position, clock and phase of the
PC screen are automatically adjusted.
Horizontal Position, Vertical Position
Use ◄/► to adjust.
Horizontal
to move PC screen left
Position
to move PC screen
Vertical
Position down
➠ p. 23
directly to switch the desired setting.
PC Settings
Auto Adjustment
Horizontal Position
Vertical Position
Clock
Phase
Auto Adjustment
Cancel
Adjust
To automatically synchronize
the phase and clock
on the TV and PC.
Cursor ◄ Cursor ►
to move PC screen right
to move PC screen up
Clock, Phase
Use ◄/► to adjust [Clock] setting to stabilize the PC screen
and [Phase] setting to improve the clarity of the PC screen.
Clock
to decrease setting
value
Phase
Note
• You may not obtain an appropriate screen with
[Auto Adjustment] for some signals. In this case, adjust the settings
manually.
• Adjust [Phase] setting after [Clock] setting has been properly
adjusted.
fun-Link (HDMI CEC)
This function allows you to operate the linked functions
between our brand devices with a fun-Link feature and this
unit connecting through an HDMI cable.
1
Use ▲/▼ to select [fun-Link (HDMI CEC)], then press
OK.
Picture
Sound
Setup
0
Features
0
0
Language
0
USB
2
Use ▲/▼ to select the desired setting, then press OK.
3
Adjust the following items.
fun-Link Control
Set the fun-Link [On] or [Off].
The following additional settings will be grayed out when you
set to [Off].
Use ▲/▼ to select the desired setting, then press OK.
Selects if you have connected an external device
On
that is compatible with the fun-Link function.
Off Disables all fun-Link.
Auto Device Off
You can set your device to turn off by interlocking from this
unit's power.
Use ▲/▼ to select the desired setting, then press OK.
Your connected fun-Link device turns off
On automatically when the unit goes into standby
mode.
Your connected fun-Link device stays on even if
Off
the unit goes into standby mode.
Cursor ◄ Cursor ►
to increase setting
value
fun-Link (HDMI CEC)
fun-Link Control
On
Auto Device Off
On
Auto TV On
On
Device List