Pc Settings; Auto Adjustment; Horizontal/Vertical Position; Clock/Phase - Emerson SLC195EM8 Owner's Manual

O
PTIONAL SETTING

PC Settings

This function lets you adjust the PC screen position, clock and phase during
PC input.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "PC SETTING",
then press [ENTER].
or
3
Adjust the setting.

AUTO ADJUSTMENT

Use [Cursor K / L] to select "AUTO ADJUSTMENT",
then press [ENTER].
or
• The Horizontal/Vertical position, clock and phase of
the PC screen are automatically adjusted in a few
seconds.
HORIZONTAL POSITION, VERTICAL POSITION
Use [Cursor K / L] to select an item,
then use [Cursor s / B] to adjust the PC screen position.
Cursor s
HORIZONTAL
to move PC screen left
POSITION
VERTICAL
to move PC screen down to move PC screen up
POSITION
26
EN
e.g.) PC mode
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
COLOR TEMP. [NORMAL]
PC SETTING
- PC SETTING -
AUTO ADJUSTMENT
HORIZONTAL POSITION [ 15]
VERTICAL POSITION [ -15]
CLOCK [ -5]
PHASE [ 0]
Cursor B
to move PC screen right
CLOCK, PHASE
Use [Cursor K / L] to select an item,
then use [Cursor s / B] to adjust the "CLOCK" setting
to stabilize the PC screen and the "Phase" setting to
improve the clarity of the PC screen.
Cursor s
CLOCK
to decrease setting value to increase setting value
PHASE
4
Press [SETUP] to exit.
Note:
• Adjust the "PHASE" setting after the "CLOCK" setting has
been properly adjusted.
• You may not obtain an appropriate screen with auto
adjustment for some signals. In this case, adjust the settings
manually.
Cursor B