Setting The Clock - Samsung MM-DG35 User Manual

Personal micro component system
Table of Contents

Advertisement

Setting the Clock

For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Switch the system on
by pressing POWER
button.
When the correct
4
hour is displayed,
press ENTER.
The minutes flash.
Increase the minutes :
Decrease the minutes :
Note
You can display the time, even when you are using another function, by pressing
TIMER/CLOCK once.
You can also use
Checking the Remaining Time
Press the REMAIN button.
For checking the remaining time of a title or chapter
being played.
Each time the REMAIN button is pressed ,
the time is displayed as below:
DVD
TITLE REMAIN TIME
CHAPTER REMAIN TIME
ELAPSED TIME
19
2
Press TIMER/CLOCK
twice.
"CLOCK" is displayed.
5
When the correct
time is displayed,
press ENTER.
"TIMER" appears in the display.
The current time is now set.
on the main set instead of
3
Press ENTER.
The hour flashes.
Increase the hours :
Decrease the hours :
buttons in step 3,4.
CD
MP3
Press the REMAIN button.
If you press the REMAIN button,

the remaining time is displayed.
To cancel this function, press the

REMAIN button again.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mm-dg36

Table of Contents