Foxconn P4M800P7MB Manual page 35

vCPU L2 Cache ECC Checking
This option is used to enable or disable CPU L2 cache ECC Checking. The
setting values are: Disabled and Enabled.
vBoot Up Floppy Seek
This option controls shether the BIOS checks for a floppy drive while booting
up. If it cannot detect one (eiter due to improper configuration or physical
unavailability), it will appear an error message. The available setting values
are: Disabled and Enabled.
vBoot Up NumLock Status
This option defines if the keyboard Num Lock key is active when your system
is started. The setting values are: On and Off.
vTypematic Rate Setting
If this option is enabled, you can use the following two items to see the
typematic rate and the typematic delay settings for your keyboard. The avail-
able setting values are: Disabled and Enabled.
vTypematic Rate (Chars/Sec)
Use this option to define how many characters per second a held-down
key generated.
vTypematic Delay (Msec)
Use this option to define how many milliseconds must elapse before a held-
down key beings generating repeat characters.
vSecurity Option
W hen it is set to "Setup", a password is required to enter the CMOS Setup
screen; W hen it is set to "System", a password is required not only to enter
CMOS Setup, but also to start up your PC.
vAPIC Mode
This option is used to enable or disable APIC function
vMPS Version Control For OS
This option is used to set up the version of MPS Table used in NT4.0 OS.
28
Chapter 3 BIOS Description