Memory - Foxconn P4M800P7MB Manual

Memory

This motherboard includes two, 240-pin slots for DDR2. You must install at
least one memory module to ensure normal operation. Mixed memory modules
from different manufacturers is not recommended.
Installation of DDR2 Memory
1. There is only one gap near the center of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Warning :
Be sure to unplug the AC power supply before adding or removing
expansion cards or other system peripherals, especially the
memory devices, otherwise your motherboard or the system
memory might be seriously damaged.
For the detailed memory support list on this motherboard, please visit the
website: http://www.foxconnchannel.com
10
Chapter 2
128 Pins
Installation Instructions
112 Pins