Foxconn P9657MA series Manual page 47

vPCI Express PME
This option is used to set the PCI Express PME.
vWake-Up by PCI card
This option is used to set the system to wake up by PCI card.The setting
values are: Disabled and Enabled.
vWake-Up On LAN
This option is used to set the system to wake up by onboard LAN. The setting
values are: Disabled and Enabled.
vUSB KB Wake-UP From S3
This option is used to set the system to wake up by USB equipment when it is
in S3(Suspend to RAM).The setting values are: Disabled and Enabled.
vResume by Alarm
This option is used to set the timing of the startup function.In order to use this
function, the PC power source must not be turned off.
vDate (of Month) Alarm
W hen the Resume by Alarm set as "Enabled", this item will be modified. It is
used to set the timing for the start-up date.
vTime (hh:mm:ss) Alarm
W hen the Resume by Alarm set as "Enabled", this item will be modified. It is
used to set the timing for the start-up time.
vPOWER ON Function
This option is used to set the power on method for your PC.
vPWRON After PWR-Fail
This option is used to set what action the PC will take with the power
supply when it resumes after a sudden power failure.
40
Power Management Events Menu
Chapter 3 BIOS Description