Foxconn P9657MA series Manual page 37

vDelay Prior to Thermal
The option is used to set delay time before the CPU enters auto thermal
mode.
vThermal Management
The option is used to manage CPU thermal.
vTM2 Bus Ratio
The option is used to set bus ratio of throttled performance state which is
initiated when the on-die sensor goes hot.
vTM2 Bus VID
The option is used to set voltage of throttled performance state which is
initiated when the on-die sensor goes hot.
vLimit CPUID MaxVal
The option is used to set limit CPUID MaxVal.
vC1E Function
The option is used to enable or disable C1E(Enhanced Halt State) function.
vExecute Disable Bit
The option is used to enable or disable execute disable bit.
vVirtualization Technology
W hen enabled, a VMM can utilize the additional hardware capabilities
provided by vendor pool technology.
30
Chapter 3
CPU Feature Menu
BIOS Description