Sharp BD-HP20S Operation Manual page 38

SETTINGS
2. You can set the audio output mode for each output terminal.
1 This sets the audio output mode for HDMI OUT terminal when selecting HDMI OUTPUT.
MENU [AUDIO VIDEO SETTINGS - AUDIO OUT]
TV ASPECT RATIO
TV TYPE
COMPONENT VIDEO OUT
HDMI VIDEO OUT
HDMI AUTO DETECTION
AUDIO OUT
DYNAMIC RANGE CONTROL
Selected item
AUTO
PCM (SURROUND)
2 This sets the audio output mode for DIGITAL AUDIO OUT (COAXIAL jack / OPTICAL terminal) when selecting
OPTICAL/COAXIAL DIGITAL OUTPUT or 2ch AUDIO OUTPUT.
MENU [AUDIO VIDEO SETTINGS - AUDIO OUT]
TV ASPECT RATIO
TV TYPE
COMPONENT VIDEO OUT
HDMI VIDEO OUT DOLBY DIGITAL
HDMI AUTO DETECTION BITSTREM
AUDIO OUT DTS
DYNAMIC RANGE CONTROL BITSTREM
NOTE
• MPEG Audio is only output as PCM (STEREO) 48 KHz.
Selected item
DOLBY DIGITAL
DTS
36
AUTO
PCM (SURROUND)
• Select this when connecting to HDMI equipment with a built-in decoder
for DOLBY DIGITAL, etc.
• Setting to AUTO will output in an audio output mode best suited to the
connected equipment.
• Select this when connecting to multi-channel HDMI equipment.
• Setting to PCM (SURROUND) will output by LINEAR PCM by decoding
audio signals recorded in each audio output mode such as DOLBY
DIGITAL, DTS.
PCM (STEREO)
PCM (STEREO)
CONFIRM
BITSTREAM • Select this when connecting to SURROUND
• Setting to BITSTREAM will output each audio signal
PCM (STEREO) • Select this when connecting to 2 channel stereo audio
• Setting to PCM (STEREO) will output by converting
Description
Description
equipment with a built-in decoder for DOLBY DIGITAL,
DTS.
by BITSTREAM.
equipment.
each audio signal into PCM 2channel audio signal.
AUTO
PCM
(SURROUND)
DOLBY
DIGITAL
DTS
BITSTREAM
PCM
(STEREO)