Table of Contents
Advertisement
■ To play back the video CD manually
Usually this unit detects the video CD and plays back pictures and
sounds. In case this unit fails to judge it correctly, you can play back
the video CD manually.
1
Press and hold the VCD AUTO/VCD/AUDIO MODE button
for 3 seconds until "VCD ON" appears on the TV screen.
<TV screen>
2
Press the
/
(
/
SELECT/RESUME) button.
To return to the automatic video CD detection mode:
Press and hold the VCD AUTO/VCD/
AUDIO MODE button for 3 seconds
until "VCD AUTO" appears on the TV
screen.
Notes:
● This setting will be cancelled when you change the discs.
● Whilst in the "VCD ON" state, you cannot play back audio CDs.
● This setting will not work during video CD and MP3 disc playback.
■ Changing the TV screen display
You can check the operation of the main unit by the on-screen dis-
play.
Each time the OSD ON/OFF button is
pressed during playback or in the stop
mode, the display will change as follows:
[During stop mode]
VCD ON
[During playback]
Track
number
<TV screen>
VCD AUTO
Note:
The displays may differ depending on the discs.
00:00
No display
01:26
002/010
No display
Total
Elapsed time
number of
tracks
04/1/28
CX-GD5200V_EN2.fm
GX-CD5200V
ENGLISH
E-24
Advertisement
Table of Contents
