Speaker Components; Installing The Speakers On The Tallboy Stand - Samsung HT-D6530 User Manual

Connections

Speaker Components

(L) (R)
FRONT
STAND
(L) (R)
STAND BASE SUBWOOFER
SURROUND

Installing the Speakers on the Tallboy Stand

1. Turn the Stand Base upside-down and connect it to
the Stand.
2. Insert small screws (4x20, For connecting Stand &
Stand Base) clockwise into the four holes marked
using a screwdriver as shown in the illustration.
!
CAUTION

When you use a torque screwdriver, be careful not
to put excessive force. Otherwise, it runs idle or
can be damaged. (torque screwdriver- below 15
kg.f.cm)
3. Connect the upper Speaker to the assembled
Stand.
4. Insert another large screw (5x15, For connecting
Speaker & Stand) clockwise into the hole on the rear
of the speaker using a screwdriver.
5. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
20
English
HT-D6530_XAC_0302.indd 20 HT-D6530_XAC_0302.indd 20
Assembled Speakers
SCREW (5X15): 2EA
SCREW (4X20): 8EA
CENTRE
SPEAKER
CABLE
1
3
5
CENTRE SPEAKER
SURROUND
FRONT
SPEAKER
SPEAKER
2
Stand
Base
Stand
4
Speaker
Stand
SUBWOOFER
2011-03-02 ¿ÀÈÄ 2:27:49 2011-03-02 ¿ÀÈÄ 2:27:49