SAVE THESE
INSTRUCTIONS
OPERATING INSTRUCTIONS
1. Place hairsetter on flat surface and plug into
outlet. RED LED should light up, indicating the
hairsetter is ON and heating rollers. This appli-
ance has a polarized plug (one blade is wider
than the other). As a safety feature, this plug
will fit in a polarized outlet only one way. If the
plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety
feature.
2. Allow rollers to heat with lid closed, as this
will provide the fastest, most efficient heat-up.
Once the rollers are hot, you can begin setting
your hair. Allow rollers to heat longer for tighter
curls. One roller has a "ready dot" on top. The
ready dot will turn from red to white, indicating
optimum curling temperature has been reached.
Never leave your hairsetter on and unattended.
Always unplug the hairsetter when not in use.
Allow hairsetter to cool, and store in a safe
place.
3. Hair should be clean and dry or slightly
damp-never wet-when setting. Hair will not set
correctly if too damp.
EASY START
20 MULTI-SIZED
TRANSLUCENT ROLLERS
20 TANGLE FREE ROLLERS:
6 jumbo, 5 large, 9 medium
MAINTENANCE
Your hairsetter is designed for household use
and is virtually maintenance free. This product
represents the highest standards of workman-
ship and engineering. If cleaning becomes
necessary, disconnect the appliance from the
power source. Allow to cool, and wipe unit
with a damp cloth. Occasionally you may want
to clean your rollers. To do so, use a damp
cloth and mild detergent or soap. If abnormal
conditions occur, unplug the hairsetter, allow it
to cool, and return it to an authorized service
representative for repair.
STORAGE
Allow hairsetter to cool. Handle cord carefully
for longer life; avoid jerking or straining at plug
connections. Place hairsetter out of reach of
children in a safe, dry location.
HAIRSETTER
™
Need help?
Do you have a question about the Easy Start HS15C and is the answer not in the manual?