Advertisement
When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:
To reduce the risk of burns, electrocution, fire, or injury to persons:
SAVE THESE INSTRUCTIONS
This styler is intended for household use. Use on Alternating Current (60 Hz) only. This unit is designed to be operated at 120V AC.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Hair should be clean, completely dry and combed before you use the curling device. Plug into an electrical outlet and turn on the switch. The red LED will blink while Conair FashionCurl is heating up. Red light must stop blinking and be steady before curling hair.
The styler's tourmaline ceramic-coated curl chamber will get very hot within a few seconds and should not be placed in contact with the skin after the styler has been turned on.
The secret to Conair FashionCurl is how easy it makes creating the perfect curl – one after another! Hair goes in, curl comes out. It's that simple. For best results, start with freshly washed and dried hair. If you are curling the lower layers first, you might want to clip some hair out of the way.
Remember: Before starting, make sure the temperature indicator light has stopped blinking.
It's a revolutionary new way to curl your hair. Fast, easy, and always perfect, curl after curl.
For more styling tips and instructional videos, visit www.curlsecret.com
NOTE: Conair FashionCurl's new brushless motor technology uses magnets instead of brushes to sense any change in speed, and turns itself off as an added safety feature and to ensure tangle-free curling action. Minimizes weight, maximizes curl control, and significantly extends the life of your appliance.
NOTE: If you continue to hold the hair section after closing the handle, Conair FashionCurl will stop and beep to indicate that you must release the tension on the hair. If you have taken too much hair, or hair is not neatly going through the center of the appliance, the Conair FashionCurl will again stop and beep to indicate a problem. This safety feature ensures there will be no tangles.
If hair does get tangled, unplug the unit and gently work the hair out of the unit.
Take very small strands one at a time and slowly remove from the chamber. If hair is tight around the barrel, carefully and gently loosen up hair outside of the tool with your fingers removing small sections at a time. Make sure fingers do not come in contact with heated chamber.
NOTE: Always release the handles first to set the curl free; if you pull away before you open the handles, the curl will be straightened out.
NOTE: Do not use this styling appliance on hair extensions.
Conair FashionCurl comes with 3 functions for added safety and energy savings:
Auto Shut-Off: If the appliance is switched on for more than 60 minutes continuously, it will automatically switch off. If you wish to continue using the appliance, simply slide the switch to the OFF position and then slide the switch to the relevant setting to turn the power on.
Sleep Mode: Energy efficient – after 20 minutes of idle time, temperature drops to around 150˚C/300˚F.
Motion Sensor: Ends sleep mode and reheats to selected temperature when handle is closed.
NOTE: Curl chamber will be hot to the touch.
Features:
Effortlessly create long-lasting beautiful curls, with Conair FashionCurl. Hair is automatically drawn into the tourmaline ceramic curl chamber where it is softly held and heated from all directions to effortlessly form the curl. Then, simply release. The result is beautiful, free-flowing curls.
The styler's two unique high-heat temperature settings and Instant Heat technology provide styling versatility for all hair types. If you have fine hair, the lower temperature will provide the best results. If you have thick, wavy or hard-to-curl hair, keep the heat setting on high.
Create a variety of curls based on two temperature settings.
CURL TYPE | TEMP. CONTROL |
LOOSE CURLS | LOW |
MED. - TIGHT CURLS | HIGH |
The Conair FashionCurl has a tourmaline ceramic easy-glide coated surface, the newest technology. This means it's not only simpler to clean off styling product residue, etc. after each use, but you'll find that hair glides easily over the coated surface of the curl chamber as you're curling. The tourmaline ceramic coated surface also helps smooth down flyaways and frizzies.
It evenly distributes heat so that the style you create has a salon-perfect, silky smooth, shining finish. Hair also slips right through the curl chamber after it's curled. The new Tourmaline Ceramic technology makes styling your hair easier and the results more professional. Never leave your styler on and unattended. However, should you fail to turn the styler off, it will shut itself off automatically within 60 minutes.
This styler features a high-performance heater that maintains constant temperature during use for precision styling. This Instant Heat technology has two temperature settings. There is a temperature that's gentle and safe for every type of hair, from the finest to the curliest and most resistant, and helps you create the look you want. And that's not all. Conair's professional salon standards of engineering provide you with a uniform and improved heat recovery system that maintains the iron at constant temperatures. There is a constant surge of power to ensure that heat is continuously and quickly delivered for optimal styling results, unlike other units, which lose heat during use. This provides consistent styling power so that every strand of your hair is set with the same level of heat and comes out the same way for a perfect finish.
Conair FashionCurl is energy efficient. The sleep mode function drops the styler's temperature to 300°F if styler remains idle after 20 minutes. And auto shut-off turns the Conair FashionCurl off after 60 minutes.
Your styler is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow to cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.
NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the appliance. Damage will occur at the high flex point of entry into the appliance, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.
When not in use, your appliance is easy to store. Allow appliance to cool, then simply store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections. Do not wrap the line cord around the appliance. Allow the cord to hang or lie loose and straight at the point of entry into the appliance.
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU'RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Fashioncurl CD213 and is the answer not in the manual?
Questions and answers