Samsung PDP-TELEVISION Owner's Instructions Manual page 32

Changing the Position of the PIP Window
5 Press the ▲ or ▼ button to select Position, then press
the ENTER/OK button.
Press the ▲ or ▼ button to select the desired PIP window
position, then press the ENTER/OK button.
➢
In Double Window (
modes, Position cannot be selected.
➢
If the PIP window is set to Double Window (
) or Double Wide (
alignment may slightly differ depending on the signal
type.
Changing the PIP Channel
6 Press the ▲ or ▼ button to select Channel, then press
the ENTER/OK button.
Press the ▲ or ▼ button at the bottom of the remote to
select the desired channel in the PIP window, then press
the ENTER/OK button.
➢
The channel can be active when the sub picture is
set to TV.
7 Press the EXIT button to exit.
) and Double Wide (
) mode, the screen size or
English - 32
PIP
Size
Position
) Channel
Size
Position
Channel
: On
:
:

: Cable 3
:
:
: Cable 3

ATV3