Connecting An External Device Equipped With Scart-Out - TerraTec Cinergy 400 TV Mobile Installation Manual

Connecting an external device equipped with Scart-out.

If you want to connect a device that is equipped with a Scart-out jack, you will need a special
adapter for establishing the connection to the TV card.
The required adapter has a Scart jack on one side, which you plug into the external device,
and three cinch jacks on the other. The three cinch jacks provide the video, audio-left and
audio-right signals.
Connect the cable to the TV card as described below:
1. Using a cinch/cinch cable, connect the cinch jack that carries the video signal (usually
yellow) to the composite-in jack on the multi-connector cable provided.
2. Connect the audio-left (usually white or black) and audio-right (usually red) jacks to their
corresponding jacks on the multi-connector cable using a stereo cinch cable.
3. In the TV software, select the "Composite" option as incoming signal.
When purchasing an adapter, check the signal direction that it is designed for. There are
adapters designed for sending signals into the video device (video-in), and those that are
designed for signals being sent by the video device (video-out). In this case, you want an
adapter with a video-out signal direction! To be certain of your purchase, you may want to buy
an adapter that lets you switch between both directions. You can find such products in vari-
ous specialty shops.
Cinergy 400 TV mobile Hardware (English)
Scart adapter
15