Table Of Contents - Central Pneumatic 69575 Owner's Manual & Safety Instructions

Safety ......................................................... 2
Specifications ............................................. 7
Setup .......................................................... 9
Operation ................................................... 12
Symbol Property or statement
PSI
Pounds per square inch of pressure
CFM
Cubic Feet per Minute flow
Cubic Feet per Minute flow
SCFM
at standard conditions
NPT
National pipe thread, tapered
NPS
National pipe thread, straight
WARNING marking concerning
Risk of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
Page 2

Table of Contents

WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
Table A: Symbol Definitions
For technical questions, please call 1-800-444-3353.
Maintenance .............................................. 14
Parts List and Diagram .............................. 18
Warranty .................................................... 20
Symbol Property or statement
Warning marking concerning
Risk of Puncture Injury.
Wear heavy-duty work gloves.
Read the manual before
set-up and/or use.
WARNING marking concerning
Risk of Hearing Loss.
Wear hearing protection.
WARNING marking concerning
Risk of Respiratory Injury. Wear
NIOSH-approved dust mask/respirator.
WARNING marking concerning
Risk of Explosion.
Item 69575