Connect with Philips EasyLink
Improve control function for the maximum
benefits by leveraging the Philips EasyLink
HDMI-CEC compatible devices.HDMI-CEC
compatible devices connected via the HDMI
connectors can be controlled by remote
controller of your display.
The following are required before enabling the
Philips EasyLink:
•
Connect more tan two HDMI-CEC
compatible devices via the HDMI
connector
Ensure normal operation of each HDMI-
•
CEC compatible devices
•
Switch to EasyLink
Note
•
The EasyLink compatible device must have
been turned on and selected as the signal
source.
•
Philips does not guarantee 100%
interoperability with every HDMI CEC device.
Enable or disable EasyLink
Once a HDMI-CEC compatible device
is enabled, your display will turn on
automatically and switch to correct signal
source.
Note
•
Do not enable Philips EasyLink if you have no
intention to use it.
1
Press Menu key.
2
Select [Setup] > [Display setup] >
[Easylink] > [EasyLink].
3
Select [Off] or [On], and press OK.
Use shortcut play
1
Press Play on connected device after
EasyLink is enabled.
» Your display will switch to correct
signal source automatically.
12
EN
Use shortcut standby
1
Press the
(Stand by - turn on)key on
your remote controller.
» Your display and all the connected
HDMI devices switch to standby
mode.
5 Product
information
Product information may be changed at any
time and without notice. For detailed product
information, please visit www.philips.com/
support.
Supported resolution
Computer format
Resolution - refresh rate:
•
640 x 480 - 60Hz
•
•
800 x 600 - 60Hz
•
1024 x 768 - 60Hz
•
1360 x 768 - 60Hz
•
1920 x 1080 - 60Hz
(BDL4210Q, BDL4610Q)
Video format
Resolution - refresh rate:
•
•
480i - 60Hz
•
480p - 60Hz
•
576i - 50Hz
•
576p - 50Hz
720p - 50Hz, 60Hz
•
1080i - 50Hz, 60Hz
•
•
1080p - 50Hz, 60Hz.
(BDL4210Q, BDL4610Q)
Multimedia
•
Supported storage devices: USB
(supports FAT or FAT 32 USB storage
device.)
•
Supported multimedia file format:
Image: JPEG
•
Audio: MP3
•
•
Video: MPEG 2/MPEG 4, H.264,
WMV
Remote controller
•
Battery: 2 x AAA (LR03 type)
Power
•
Main power: 100-240V, 60-50Hz
Power consumption at standby mode: ≤
•
0.5 W
•
Ambient temperature: 5 - 40 degree
Celsius
•
Power consumption:
BDL3210Q: 100W
•
•
BDL4210Q: 140W
•
BDL4610Q: 160W
Supported display stand
Please purchase Philips or VESA compatible
display mounting stand to install your display.
Please keep at least 2.2 inch (5.5 mm) clearance
between the wall and back of your display to
avoid cable and connector damage.
US:For use only with UL listed Wall Mount
Bracket.
Dimension
Required
Required installation
of display
distance
screws
screen (inch)
(mm)
200 x 100 4 x M4 (12 mm ≤ L ≤
32
16 mm)
4 x M6 (18mm
42
400 x 400
recommended)
4 x M6 (18mm
46
400 x 400
recommended)
Product specification
Design and specification may be changed at any
time and without notice.
BDL3210Q
•
Without stand
Dimension (W x H x D): 745.2 x
•
462.7 x 39.9 (mm)
•
Weight: 17.75 lb
With stand
•
•
Dimension (W x H x D): 745.2 x
513.2 x 180 (mm)
•
Weight: 18.47 lb
BDL4210Q
•
Without stand
Dimension (W x H x D): 978.2 x
•
EN
594.1 x 79.5 (mm)
•
Weight: 30.09 lb
13