Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Switch the system on
1
by pressing POWER
button.
3
Press ENTER.
The hour flashes.
•
Increase the hours :
•
Decrease the hours :
When the correct
5
time is displayed,
press ENTER.
•
"TIMER" appears in the display.
•
The current time is now set.
•
You can display the time, even when you are using another
Note
function, by pressing
TIMER/CLOCK once.
•
You can also use
buttons in step 3,4.
2
Press TIMER/CLOCK
twice.
•
"CLOCK" is displayed.
When the correct
4
hour is displayed,
press ENTER.
The minutes flash.
•
Increase the minutes :
•
Decrease the minutes :
on the panel front instead of
ENG
18