Setting Up Anynet; Switching Between Anynet + Devices - Samsung LED TV User Manual

Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on
N
the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
N
Home Theatre's Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theatre, not the TV.
Connect only one Home Theatre.
N
You can connect an Anynet + device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet + functions.
N
Anynet + works when the AV device supporting Anynet + is in the Standby or On status.
N
Anynet + supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
N

Setting Up Anynet +

¦
Press the TOOLS button to display the Tools menu. You can also display Anynet + menu
T
by selecting Tools → Anynet + (HDMI-CEC).
Setup
❑
Anynet + (HDMI-CEC) → Off / On

To use the Anynet + Function, Anynet + (HDMI-CEC) must be set to On.
When the Anynet + (HDMI-CEC) function is disabled, all the Anynet+ related operations
N
are deactivated.
Auto Turn Off → No / Yes

Setting an Anynet + Device to turn Off automatically when the TV is Turned Off and setting a TV
to turn off automatically when a HDMI-CEC device requestes tv to turn off.
The active source on the TV remote must be set to TV to use the Anynet + function.
N
If you set Auto Turn Off to Yes, connected external devices are also turned off when the
N
TV is turned off. If an external device is still recording, it may or may not turn off.

Switching between Anynet + Devices

¦
. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Anynet + devices connected to the TV are listed.
N
If you cannot find a device you want, press the red button to scan for devices.
N
. Press the ▲ or ▼ button to select a particular device and press the ENTERE button. It
is switched to the selected device.
Only when you set Anynet + (HDMI-CEC) to On in the Application menu, the Device
N
List menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
N
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
N
When the device scan is complete, the number of devices found are not displayed.
N
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to
N
the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet + function. Make sure to
N
switch to an Anynet + device by using the Device List.
English - 
Media Play (USB & DLNA)
Anynet + (HDMI-CEC)
Content Library
Internet@TV
Home Network Centre
Setup
Anynet + (HDMI-CEC)
: On ▶
Auto Turn Off : Yes
U Move E Enter R Return
Setup
Anynet + (HDMI-CEC)
: On
Auto Turn Off : Yes ▶
U Move E Enter R Return
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Setup
U Move E Enter R Return