Recipients; Schedules; Recurrences - Axis M3024–LVE User Manual

Network camera
Hide thumbs Also See for M3024–LVE:
Table of Contents

Advertisement

AXIS M3024–LVE Network Camera
Events
The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time
and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered
again during the post-trigger time, the recording time will be extended with another post-trigger time period.
For more information, see the online help

Recipients

Recipients receive media files and notification messages. The following recipients are available:
Recipient
1
Email
FTP
HTTP
2
Network Share
TCP
1.
Some email providers have security filters that prevent users from receiving or viewing large amount of attachments, from receiving scheduled
emails and similar. Check the email provider's security policy to avoid delivery problems and locked email accounts.
2.
A network share can also be used as a storage device for recorded video. Go System Options > Storage to configure a network share before
setting up a continuous recording or an action rule to record video. See Storage, on page 44 for more information about storage devices.
To add a recipient:
1. Go to Events > Recipients and click Add.
2. Enter a descriptive name.
3. Select a recipient Type.
4. Enter the information needed for the recipient type.
5. Click Test to test the connection to the recipient.
6. Click OK.

Schedules

Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside
office hours. Use one of the predefined schedules or create a new schedule as described below.
To create a new schedule:
1. Go to Events > Schedules and click Add.
2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.
3. Click OK.
To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page.

Recurrences

Recurrences are used to trigger action rules repeatedly, for example every 5 minutes or every hour.
.
Use with action
Send Images
Send Notification
Send Images
Send Images
Send Notification
Send Images
Send Notification
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents