Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Audio Note OTO Line SE Signature
Summary of Contents for Audio Note OTO Line SE Signature
- Page 1 OTO Line SE Signature INTEGRATED AMPLIFIER OWNER’S INFORMATION...
- Page 2 CONTENTS 1) IMPORTANT SAFETY INFORMATION 2) CE DECLARATION OF CONFORMITY DISPOSAL POWER REQUIREMENTS 3) INTRODUCTION 4) OVERVIEW UNPACKING AND INSTALLATION 5) CONNECTION 6) OPERATION 7) TECHNICAL SPECIFICATIONS 8) WARRANTY INFORMATION CONTACT INFORMATION...
- Page 3 ! IMPORTANT SAFETY INFORMATION ! RISK OF SHOCK OR ELECTROCUTION! INTERNAL OPERATING VOLTAGES ARE LETHAL! Do not remove top cover, unless specifically instructed to do so in the user manual. This unit contains fuses and other safety components in accordance with BS60065 requirements.
- Page 4 BS EN 60065 in accordance with the regulations 73/23/EEC, 89/336/EEC (from 1 January 1997) CE 94 Peter Qvortrup, Director Audio Note (UK) Limited 25 Montefiore Road Hove East Sussex BN3 1RD United Kingdom...
- Page 5 INTRODUCTION Thank you for purchasing this Audio Note (UK) product. With the correct care it should give you many years of pleasure and enjoyment. Please take the time to read all of the information in this manual before connecting your new component to an electrical supply or your system, to ensure both your safety and satisfaction.
- Page 6 – allow the OTO Line SE Signature to produce impressively extended and controlled bass. The OTO Line SE Signature fulfills all Audio Note (UK) Level 2 criteria: - Pure Class A Single Ended Pentode operation Materials and component quality UNPACKING AND INSTALLATION Please take care when unpacking your OTO Line SE Signature Integrated Amplifier.
- Page 7 Connect the ‘Rec-Out’ or ‘Line Out’ sockets on your recording device to the ‘Tape In’ sockets of the OTO Line SE Signature Signature, and the ‘Tape Out’ sockets to the ‘Rec-In’ or ‘Line In’ sockets of your recording device.
- Page 8 Valve Life The valves supplied with your amplifier should provide approximately 6000 hours of operation. They are specially selected by us, and should only be replaced with matched pairs. Please consult your Audio Note (UK) dealer should your valves need replacing.
- Page 9 TECHNICAL SPECIFICATIONS 100k ohm, line level INPUT IMPEDANCE 300mV for full output INPUT SENSITIVITY 10 watts RMS per channel into 4 or 8 Ohm MAXIMUM OUTPUT loads +/- 0.3dB CHANNEL BALANCE VALVE COMPLIMENT 2 x ECC83 4 x EL84 UNIT WEIGHT 17KG SHIPPING WEIGHT 19KG...
- Page 10 Audio Note (UK) warrants this product to be free from defects in materials and workmanship for two years from the original date of purchase from an appointed Audio Note (UK) dealer, and agrees to cover the cost of parts and associated labour required to correct such defects, subject to terms & conditions.
- Page 11 CONTACT INFORMATION If in the future your Audio Note (UK) product requires servicing, or if you require technical support or have any questions regarding this or any of our other products, please contact your local Audio Note (UK) dealer. Alternatively, please feel free to contact us directly: -...
Need help?
Do you have a question about the OTO Line SE Signature and is the answer not in the manual?
Questions and answers