Table of Contents
Advertisement
holes; insert the Weight Bar (#13) from outside of one Safety Stop Frame through the
Lifting Sleeve to the other Safety Stop Frame on the other side.
B.) Turn and attach the two safety catch hooks on the Lifting Sleeve (#8) to the selected pegs
on the Left and Right Upright Beams (#1 & #2).
C.) Attach two Weight Bar Sleeves (#26) onto the Weight Bar from both ends. Attach two
Spring Clips (#39) to the Sleeves.
D.) Attach four Weight Posts (#12) into the holes on Left & Right Rear Support (#5 & #6).
Secure each Weight Post to the Support with one M10 x ¾" Allen Bolt (#33) and one Ø ¾"
Washer (#77). Slide four Olympic Sleeves (#25) to the four Weight Posts. Attach four
Spring Clips to the Sleeves.
9
DIAGRAM 3
Advertisement
Table of Contents
