LCD screen message
Recovery Mode
Parent topic:
Related topics
Loading Paper
Placing Originals on the Product
Solving Network Problems
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load plain paper in the product.
3. Press the
4. Press the arrow buttons to select Setup and press the OK button.
5. Press the arrow buttons to select Maintenance and press the OK button.
You see this screen:
Condition/solution
The firmware update has failed, and the printer is in recovery mode. Visit
Epson's support website at
www.epson.ca/support
update.
Solving Problems
Home button, if necessary.
www.epson.com/support
(Canada) for instructions on repeating the firmware
195
(U.S.) or