Page 1
The LS-60 programmable communicating thermostat operates via a high-quality, easy-to-use touch screen. To program or adjust your LS-60, simply touch your finger firmly to the screen. The screen will automatically light up and you will hear a “beep.” Do not use a sharp top cover or metallic device;...
Control Screens HOME Screen Before you operate the please get familiar with these basic control screens. All the functions are accessed through these screens: HOME, MENU, PROGRAM and MANUAL. The touch screen technology allows you to select (by touching) an item and change it using the +/- arrows or the time arrows.
MENU Screen The MENU screen is the gateway to many functions or settings of the . It is displayed when you press the MENU button. [See page 10 for details] Chirp set Filter Timer set Set Time Touch this to turn the Touch and hold Touch this area to set 5 sec to change.
PROGRAM Screen The stand alone PROGRAM screen sets the control for your home HVAC system with out a central controller. Press and hold PROG for 10 sec to access it. After that it is displayed when you press the PROG button. [See page 8 for details] Return HOME Set Time Slot...
MANUAL Screen The Manual Screen control screen is where you can make temporary changes to your ’s operation. From the Full HOME screen, touch the main [See page 13 for details] temperature display to use this screen. Manual Override Indicator Target Shows TEMPORARY when Room...
Page 6
Simple HOME Screen Make this the default HOME screen for your by holding the PROG button for 12 seconds. This Simple HOME screen gives you limited access to the ’s on screen display and no programming capability. It makes the behave like a simple one setting Current Room...
Initial Settings Press MENU to to access the following commands (from HOME screen). Set day of the week Touch the Day of the week area to cycle through the days of the week to select the current day. Set time of day Touch the Time of Day arrows to move the time selection forward or backward until it displays the current time.
Auto-Run Program comes pre-programmed with an EPA approved program. This program is recommended by the EPA for energy efficiency. We strongly recommend that you Auto-Run this program for one week, and see if it works for you. If it does not fit your needs you can always input a custom program. To run the EPA program, set the mode switch to HEAT or COOL.
Page 9
PROGRAM cont. Select the day you want to program. The day of the week starts at SU - Sunday and can be advanced to the day you want to program. Touch the day of the week area to cycle through the days of the week to the desired day. Select the time slot (period) you want to program (MORN, DAY, EVEN, NITE).
0.5° to 2.0° F (.25° to 1° C). For example, if SWING is set to 2.0° F and the LS-60 is set to 70°F Target Temperature, the heat cycle will start when room temperature drops to 68°F.
Page 11
Set - Touch this to switch the temperature display scale from o F to o C . - AIR FILTER ALERT - The LS-60 can be programmed to remind you when the HVAC FILTER sytem’s air filter needs changing. Touch FILTER. The display will show the usage to date.
Page 12
CALIBRATE Your thermostat was accurately calibrated at the factory to ±1° F of actual ambient temperature. You do have the option, however, to change the display temperature to match that of a previous thermostat, or to match another thermostat already in your home. The range of change is from -6°F to +6°F or -3°C to +3°C.
MANUAL Screen Functions The LS-60 has 4 manual override commands. The manual screen is accessed by touching the large current temperature display in the middle of the HOME screen. IMPORTANT: The Mode must be in HEAT or COOL to access the manual screen.
F all day and 82 EMER (in HEAT PUMP type) If you set your LS-60 for HEAT PUMP with auxiliary heat, EMER function is available on the MANUAL screen. If you touch EMER, it displays EMER|ON. Your HEAT PUMP is disabled and auxiliary heat is your sole source of heat.
The mode button sets the LS-60 to HEAT COOL or OFF modes. Press it once to step to the next mode. If the LS-60 is in OFF and you want to return to the mode you were previously in, touch the OFF indicator on screen.
The LS-60 has a minimum cycle time of 4 minutes to protect your Compressor Protection compressor in cool and in heat pump (if you have one). The Home screen will show a small clock and A/C during this time and the compressor will not come on until the 4 minute delay is over.