Hour Meter; Tracking - Husqvarna MZ28ZT BF Operator's Manual

Husqvarna ride-on mower
Hide thumbs Also See for MZ28ZT BF:
Table of Contents

Advertisement

Hour Meter

The hour meter displays the total operating time.
It will flash CHG oIL (Change oil) at 50 hour intervals.
The flash duration is one hour before and one hour
after the interval. The CHG oIL icon will come on
and shut off automatically. The hour meter cannot be
manually reset.

Tracking

If the mower is not tracking straight, check the
air pressure in both rear tires. Recommended air
pressure for the rear tires is 15 psi (1 bar).
1. Tracking adjustments are made using the tracking
knob. The tracking knob acts as limiting device for
the motion control levers when in the full-forward
position.
2. For preliminary tracking adjustment, move unit
to an open, unobstructed area such as an empty
parking lot or open field.
3. Rotating the tracking knob allows fine tuning
adjustments so the machine tracks straight with
the steering control levers in the full forward
position.
4. Rotate the knob clockwise (as viewed from the
operation position) to increase the speed on the
left lever. Rotate counter clockwise to decrease
speed.
CONTROls
Hour meter
Tracking adjustment
8058-043
8058-044
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

966663701

Table of Contents