Completing Your Installation With A Light Fixture - Hunter ceiling fan Installation And Operation Manual

7 • Completing Your Installation With a Light Fixture
Step 7-1
10
Step 7-2
Housing
Assembly Screw
Hunter Fan Company
WARNING: Use only the light fixture supplied with this fan model.
7-1. To attach the lower switch housing, connect the upper plug
connectors from the motor to the lower plug connectors in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-2. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with two #6-32 x 7/8" housing assembly screws.
7-3. The last installation step when installing the light fixture is to
install the glass bowl. See "Installing the Glass Bowl" on page 11 for
instructions.
42824-01 • 03/02/07