Advertisement
Mobile Beam™/Mobile Ray™
Unpacking:
Every Mobile Beam™ and Mobile Ray™ have been thor-
oughly tested and has been shipped in perfect operating condition.
Carefully check the shipping carton for damage that may have occurred
during shipping. If the carton appears to be damaged, carefully inspect
your units for any damage and be sure all accessories necessary to
operate the system have arrived intact. In the event damage has been
found or parts are missing, please contact our toll free customer sup-
port number for further instructions. Please do not return the system to
your dealer without first contacting customer support.
Mobile Beam™/Mobile Ray™
The Mobile Beam™ and Mobile Ray™ carry a one year (365 days)
limited warranty. Please fill out the enclosed warranty card to validate
your purchase. All returned service items whether under warranty
or not, must be freight pre-paid and accompany a return authoriza-
tion (R.A.) number. The R.A. number must be clearly written on the
outside of the return package. A brief description of the problem as
well as the R.A. number must also be written down on a sheet of
paper included in the shipping carton. If the unit is under warranty,
you must provide a copy of your proof of purchase invoice. You may
obtain a R.A. number by contacting our customer support team on
our toll free customer support number. All packages returned to the
service department not displaying a R.A. number on the outside of
the package will be returned to the shipper.
American DJ
www.americandj.com Mobile Beam™/Mobile Ray™ User Manual Page 3
©
®
Unpacking
Product Registration
Mobile Beam™/Mobile Ray™
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt-
age for your unit.
• Do not attempt to operate this unit if the power cord has been frayed
or broken. Please route your power cord away from foot traffic.
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fire in the event of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the rear cover under any conditions. There are no
user serviceable parts inside.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6" (15cm) between this device and a wall.
• Do not attempt to operate this unit if it becomes damaged in any way.
• Never operate this unit when it's front cover is removed.
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• During long periods of non-use, disconnect the unit's main power.
• Always mount this unit in safe and stable matter.
• Power-Cord Protection - Power-supply cords should be route so
they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords a plugs,
convenience receptacles, and the point where they exit from the
fixture.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 8.
• Heat -The fixture should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a
marked change in performance.
American DJ
www.americandj.com Mobile Beam™/Mobile Ray™ User Manual Page 4
©
®
Safety Precautions
Advertisement
