American DJ Accu Wash 250 User Instructions page 8

Accu Wash 250™
On-Board System Menu.
easy to navigate system menu. This next section will detail the func-
tions of each command in the system menu.
Enter Button -
To access the main menu locate the ENTER button (5)
on the side of the unit. Press this button to activate the system menu.
Tap the UP button (3) until you reach function you wish to change.
When you reach the function you wish to change tap the ENTER
button. When a function is selected the menu will begin to flash, use
the UP button to change the function. Once your changes are made
tap the ENTER button again to lock the change in the system, and
press the MODE/ESC button until your reach the beginning of system
A001).
menu ( If the ENTER button is not selected within eight seconds
the system will automatically return to menu section. To exit without
making any changes tap the MODE/ESC button (2).
MODE MAIN MENU -
ADDR
DMX Address Setting via control board -
1. Access the main menu by pressing the ENTER button.
2. "ADDR" should now be displayed. Press ENTER.
3. "A001" should be displayed. Adjust the DMX address by
pressing the UP or DOWN buttons.
4. Press ENTER to confirm. "PASS" will flash for a few seconds
and then "A001" will be displayed again.
5. Press the MODE/ESC button to return to the main menu.
When the display is on "A001", you can directly press the UP
or DOWN buttons to change the DMX start address.
TEST MAIN MENU -
TEST
- This will test the functions of each channel.
1. Access the main menu.
American DJ - www.americandj.com - Accu Wash 250™ Instruction Manual Page 15
®
System Menu
The Accu Wash 250™ comes with an
Accu Wash 250™
2. Tap the UP button until "TEST" is displayed, press ENTER.
4. The display will show "T-01", this means that your are now
testing channel 1. If you press UP till "TE-3" is displayed, the
unit will test the color channel, changing the color one by one
and also showing the rainbow effect with different speeds.
5. Press MODE/ESC to exit.
AUDI MAIN MENU -
MSTR
With the function "MSTR", you can designate a unit
to be the master in a sound active, master/slave configura-
tion
1. Access the main menu.
2. Tap the UP button until "AUDI" is displayed, press ENTER.
3. Tap the UP button until "MSTR" is displayed, press ENTER.
4. "PASS" should display quickly.
5. Press MODE/ESC to return to the main menu.
ALON
With the function "ALON", you can run the unit in
stand alone, sound active mode
1. Access the main menu.
2. Tap the UP button until "AUDI" is displayed, press ENTER.
3. Tap the UP button until "ALON" is displayed, press ENTER.
4. "PASS" should display quickly.
5. Press MODE/ESC to return to the main menu. The menu
must display "SO-A"
LAMP MAIN MENU -
LAMP
With this function you can switch the lamp on or off
American DJ - www.americandj.com - Accu Wash 250™ Instruction Manual Page 16
®
System Menu