Editing Program - American DJ Accu Wash 250 User Instructions

Accu Wash 250™
Editing procedure 1: Using the control board only.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed. Press ENTER.
3. The display will show "SC01", this stands for the scene
number. For example, "SC01" is displayed, it means you will
be editing scene 1, press ENTER. You can change the scene
number by pressing the UP button.
4. Press ENTER, the display will show "C-1", this stands for
the channel number. If "C-01" is displayed, you will be edit-
ing chan- nel 1 of your selected scene, press ENTER. You can
change the scene number by pressing the UP button.
5. The display will show the DMX value for the channel that is
being edited. It will be displayed as "11XX", it stands for Chan-
nel 11 of the editing scene, the DMX value is "XX".
6. Adjust the DMX value by pressing the UP button, until you
get the expected effect for this channel.
7. Press ENTER to enter the editing of the other channels of the
scene.
8. Repeat steps 5-8, until you finish setting all the DMX values
for all the channels of this scene, each scene can have 15
channels maximum.
9. Once all the channels are completed, the display will flash
"TIME", this stands for the time needed to run this scene.
10. Press ENTER to edit the time needed, the display shows
"T-XX", "XX" stands for the time needed to run this scene. For
example, "T-02" means scene 1 needs 6 seconds to run, "T-15"
means scene 5 needs 45 seconds to run.
11. Adjust the time needed by pressing the UP button.
12. Press ENTER to save the settings for the scene you are
editing, the display will change to the next scene automatically.
American DJ - www.americandj.com - Accu Wash 250™ Instruction Manual Page 27
®

Editing Program

Accu Wash 250™
13. Repeat steps 3-12 to edit other scenes, you can edit and
save 48 scenes maximum.
14. Press MODE/ESC to exit, now you have edited and saved
scenes using the control board. The number of steps can be
defined under "Step" and the scenes can be called up under
"Run". To run the scenes see page 26.
Editing procedure 2: Using an external controller.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed. Press ENTER.
3. The display will show "SC01", this stands for the scene
number to be edited. For example: If "SC01" is displayed, you
will be editing scene 1.
4. Change the scene number by pressing the UP button.
5. Press ENTER, the display will show "C-01", the "1" stands
for the channel number 1.
6. Press the UP button until "CEDT" is displayed, press ENTER.
7. The display will show "OFF", press the UP button so that
"ON" is displayed, press ENTER.
8. The display shows "SC02". You have successfully down-
loaded the first scene.
9. Adjust the Step-time. needed by pressing the UP button.
10. Call up the second scene in your controller now.
11. Repeat steps 3-6 until all desired scenes are downloaded.
12. Press MODE/ESC to exit. The number of steps can be
defined under "Step" and the scenes can be called up under
"Run".
American DJ - www.americandj.com - Accu Wash 250™ Instruction Manual Page 28
®
Editing Program