American DJ Accu Wash 250 User Instructions page 13

Accu Wash 250™
5. Press the UP button to select "ON" to activate this function,
or "OFF" to deactivate this function.
6. Press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
VER
- Use this function to display the Software version of
the unit.
1. Access the main menu.
2. Tap the UP button until "SPEC" is displayed, press ENTER.
3. Tap the UP button until "VER" is displayed, press ENTER.
4. The display will show "V-1.0", this is the version number, the
display may also show "V-1.0" ~ "V-9.9" etc.
5. Press ENTER or MODE/ESC to exit.
American DJ - www.americandj.com - Accu Wash 250™ Instruction Manual Page 25
®
System Menu Accu Wash 250™
EDIT MAIN MENU
program into the memory (EEPROM) via the control panel or via
the external controller.
You will find and use these menus when you are designing your
own personal program.
STEP
steps in the Run Program.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "STEP" is displayed, press ENTER.
4. The display shows "S-01", "01" stands for the first step of
your program. You can call up to 48 scenes in "Run". For exam-
ple, if "S-05" is displayed, "05" means that "Run" will run the
first 5 scenes you saved in "Edit".
5. Press ENTER to save and exit.
RUN
made program. You can edit and set the individual scenes
and steps under Edit.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "RUN" is displayed, press ENTER.
4. Press the UP button to display "ON" to activate this function,
or "OFF" to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
American DJ
- This menu item allows you to write a
- With this function you can define the number of
With the function "RUN", you can run your own pre-
- www.americandj.com - Accu Wash 250™ Instruction Manual Page 26
®
Editing System Menu