Playing Media Files Using The Usb Host Feature - Samsung DVD-P290K User Manual

Hide thumbs Also See for DVD-P290K:
Table of Contents

Advertisement

- Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
Sound quality with WMA files basically depends on the rate
of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling
rate, that is conversion to WMA format, of at least 64Kbps
and up to 192Kbps. Conversely, files with decompression
rates below 64Kbps or over 192Kbps will not be played
properly.
- Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected to
prevent illegal copying. These files are of the following types:
Windows Media (registered trade mark of Microsoft Inc) and
SDMI (registered trade mark of The SDMI Foundation). You
cannot copy such files.
- Important:
The above recommendations cannot be taken as a
guarantee that the DVD player will play MP3 recordings,
or as an assurance of sound quality. You should note that
certain technologies and methods for MP3 file recording on
CD-Rs prevent optimal playback of these files on your DVD
player (degraded sound quality and in some cases, inability
of the player to read the files).
- This unit can play a maximum of 500 files and 500 folders
per disc.
Playing Media Files Using
the USB Host feature
You can enjoy the media files such as pictures,
movies and tunes saved in an MP3 player, USB
memory or digital camera in high audio by connect-
ing the storage device to the USB port of the DVD
Player.
Using the USB HOST feature
1. Connect the USB device to the USB port on the front of the
unit.
2. If there is partision Of USB, Press the π/† button to select
the one of partision from USB, then Press ENTER.
Disc
USB
3. Press the π/† buttons to select a file in USB. Press
ENTER to Open file.
Note
• Each time the USB button on the remote control is
pressed, a frame of the USB device selection will
appear.
• " USB" appears on the display screen.
• USB MENU screen appears on the TV screen and the
saved file is played.
Safe USB Removal
To prevent damage to the memory stored in the USB device,
perform safe removal before disconnecting the USB cable.
- Press the STOP (
) button
- Remove the USB cable.
Skip Forward/Back
During playback, press the (
• When there is more than one file, when you press the
button, the next file is selected.
• When there is more than one file, when you press the
button, the previous file is selected.
To play back the disc at a faster speed, press
(
/
) during playback.
• Each time you press either button, the playback speed
will change as follows:
2x ➞ 4x ➞ 8x.
STOP
Off
00:00:00
/
) button.
English _21

Advertisement

Table of Contents
loading

Table of Contents