PRECAUTIONS PRECAUTIONS 1. Setting up 4. Disc - Refer to the identification label located on - Do not clean the disc using record-cleaning the rear of your player for its proper operat- sprays, benzene, thinner, or other volatile ing voltage. solvents that may cause damage to the disc surface.
WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT SAMSUNG'S CUSTOMER SERVICE CENTER.” Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) • DVD-RAM • CDV •...
Description Front Panel Controls STANDBY/ON ( OPEN/CLOSE ( When STANDBY/ON is pressed on, the indicator goes Press to open and close the disc tray. out and the player is turned on. DISPLAY STANDBY indicator Operation indicators are displayed here. When the unit is first plugged in, this indicator lights. SKIP ( Allow you to search forward/backward through Connect Microphone for karaoke functions.
Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components you are connecting for more information on those / ❷...
Page 6
(Audio signals are delivered through the audio output.) Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the DVD player to the S-VIDEO IN terminal of TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV.
Page 7
DVD player to the COMPONENT IN terminal of TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.
Note - When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio Setup menu. If it is set to Off, sound doesn't come out or there will be a big noise.
Using the Search and Skip Using the Display Function Functions When Playing a DVD/VCD During play, you can search quickly through a chapter or 1. During play, press the INFO button on the remote control. track, and use the skip function to jump to the next selec- - You can select Info in the function menu by pressing tion.
Using the A-B Repeat function 1. Press the REPEAT button on the remote control. 2. Press the ➛/❿ buttons to Select A-B button. 3. Press the ENTER button at the point where you want FUNCTIONS FUNCTIONS repeat play to start (A). B is automatically highligh ted. 4.
Info Zoom Bookmark Repeat EZ View Angle Enter Return Menu 3. Press the 4. Press the ➛/❿ buttons or you can use the number buttons ❿ or ENTER button. on the remote control to select the desired angle. ANGLE 4. When you reach the scene you want to mark, press the Note ENTER button.
The above recommendations cannot be taken as a guaran Press the REPEAT button to change the playback mode. There tee that the DVD player will play MP3 recordings, or as an are four modes, such as Off, Track, Folder and Random.
Using the Setup Menu Using the Player Menu Language 1. With the unit in Stop mode, press the MENU button. The Setup menu lets you customize your DVD player by 2. Press the allowing you to select various language preferences, set up or ENTER button.
❹ Dynamic Compression ❶ TV Aspect Depending on a type of television you have, you may - On : To select dynamic compression. want to adjust the screen setting (aspect ratio). - Off : To select the standard range. ❺ PCM Down Sampling - 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you - On : Select this when the Amplifier connected to the...
• Check the region number of the DVD. • 5. 1 channel sound is reproduced only when the following conditions are met : 1) The DVD player is connected with the proper Amplifier 2) The disc is recorded with 5.1 channel sound.
*Frequency Response 96 kHz Sampling : 4 Hz to 44 kHz Output *Dynamic Range 100 dB *: Nominal specification - Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. - Weight and dimensions are approximate. Memo Memo...