Table of Contents
Advertisement
Serial ATA II Connectors: SATA_1, SATA_2,
SATA_3, SATA_4; SATA_5, SATA_6
The Serial ATA II connector is used to connect
the Serial ATA II device to the motherboard. These
connectors support the thin Serial ATA II cables
for primary storage devices. The current Serial
ATA II interface allows up to 300MB/s data trans-
fer rate.
Audio Connectors: AUX_IN
AUX_IN is Sony standard CD audio connectors,
it can be connected to a CD-ROM drive through
a CD audio cable.
Chassis Intruder Connector: INTR
The connector connects to the chassis security
switch on the case. The system can detect the
chassis intrusion through the status of this
connector. If the connector has been closed
once, the system will send a message.
COM Connector: COM2
This motherboard provides an additional serial
COM header for your machine.Connect one side
of a switching cable to the header, then attach
the serial COM device to the other side of the
cable.
14
Chapter 2
Installation Instructions
1
GND GND
T X +
SATA_1/2/3/4/5/6
1
AUX_IN
1 INTRUDERJ
SIN
2
1
RLSD
GND
RX+
TX -
RX-
CD_L
GND
CD_R
2 GND
INTR
DTR#
CTS#
Empty
DSR#
10
9
GND
RI#
SOUT
RTS#
COM2
Advertisement
Table of Contents
