Table of Contents
Advertisement
Channel - Manual Store
You can store channels,
TV
including those received via
Programme
Colour System : AUTO
cable networks. When storing
Sound System : BG
channels manually, you can
Search
Channel
choose:
Store
- Whether or not to store each of
the channels found
Move
- The programme number of
each stored channel which you wish to identify.
Programme (Programme number to be assigned to a
◆
channel)
Colour System: AUTo/PAl/SECAM/NTSC4.43/
◆
NTSC3.58
Sound System: BG/DK/I/M
◆
Search (When you do not know the channel numbers):
◆
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
Channel (When you know the number of the channel to
◆
be stored):
➢
You can also select the channel number directly by
pressing the numeric buttons (0-9).
Store (When you store the channel and associated
◆
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
☛
Channel mode
◆ P (Programme mode): When completing tuning,
the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
◆ C (Real channel mode): You can select a channel
by entering the assigned number for each air
broadcasting station in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel
in this mode.
Channel - Add/Delete
You can exclude channels you
TV
have chosen from the channels
▲ More
P 1 : Added
you scanned. When you scan
P 2 : Added
P 3 : Added
through the stored channels,
P 4 : Added
those you have chosen to
P 5 : Added
▼ More
skip are not displayed. All of
the channels that you did not
Move
specifically choose to skip are
displayed during scanning.
Method:
ENTEr/► : Select Added or Deleted.
Channel - Fine Tune
If the reception is clear, you do not have to fine-tune the
Manual Store
: P 3
channel, as this is done automatically during the search and
►
store operation. If however the signal is weak or distorted,
►
:
46MHz
you may have to fine-tune the channel manually.
: C 4
:
?
Method:
◄/► : You can obtain a sharp
Adjust
Return
and clear picture and good
sound quality.
▲/▼ ENTEr : You can reset
the setting.
ENTEr : You can memorise
adjusted picture or sound.
Channel - Channel Grouping
You can choose your category
and find your desired channel
in a few seconds. You can save
a channel under the following
categories-Movie, Music, News,
Sports, and User.
Method:
▲/▼ : Used to select a
Programme.
◄/► : Used to select the
desired channel group.
▲/▼ : Used to confirm the new
choice.
➢
You can also press ToolS
button and enter Easy
View to use this function.
Channel - lNA
When a weak broadcast signal
causes an unclear, noisy picture,
Add/Delete
the "LNA" feature improves the
picture quality by setting to "
On". If you experience noise
on a certain noise on a certain
channel, set the the "LNA" to "
On" or "Off" for this channel, to
Enter
Return
obtain the optimum picture.
Method:
ENTEr : On/Off
Fine Tune
P 1
0
Reset
Move
Store
Adjust
Return
Channel Grouping
TV
Group Select :
Sport
►
Set Channel Group
►
Move
Adjust
Return
Set Channel Group
Movie Music News Sport User
P 1
P 2
P 3
P 4
P 5
P 6
P 7
P 8
Move
Adjust
Return
Channel
TV
Auto Store
►
Manual Store
►
Add/Delete
►
Fine Tune
►
Sort
►
Channel Grouping
►
LNA
: On
►
Move
Enter
Return
English - 4
Setup - Time
TV
Clock
You can set the television
Clock
Sleep Timer
clock so that the current
Scheduler
time is displayed when
pressing the INFo button
on the remote control. You
must also set the time if you
Move
wish to use the automatic on
or off timers.
Sleep Timer
You can select a time period of between 30 and 180
minutes after which the TV automatically switches to
standby mode.
➢
You can also press the ToolS button to enter
Sleep Timer.
Scheduler
TV
You can set the scheduler
P On Time
to make the TV return to a
1.-- --:--
2.-- --:--
particular channel at a pre-
3.-- --:--
set time.
4.-- --:--
5.-- --:--
➢
Upto 5 Programmes
On Timer Volume
can be scheduled at a
Move
time.
➢
If the Clock is not set in the Time menu, a pop-up
warning will flash if user tries to enter Scheduler.
➢
You can also press ToolS button and enter Easy
View to use this function.
on Timer Volume
The preferred volume can be set for when the timer
automatically turns on the TV.
Method:
◄/► : Move to the programme hour or minute.
▲/▼ : Used to set programme hour or minute.
▲/▼ ENTEr : Set option of YES/NO to activate/deactive
the operation.
☛
You must set the clock first.
☛
Auto Power Off
When you set the timer "On", the TV will eventually turn
off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available
in timer "On" mode and prevents overheating, which
may occur if a TV is on for too long.
Time
0 0 : 0 0
: Off
►
Enter
Return
Scheduler
Off Time Set
--:--
No
--:--
No
--:--
No
--:--
No
--:--
No
10
Enter
Return
Advertisement
Table of Contents
