Problem Solver - Monogram ZGU48N4G Owner's Manual

Questions? PROBLEM
Before you
BURNERS DO NOT
LIGHT OR SPARK
call for
RANDOMLY
service...
BURNERS HAVE
YELLOW OR
YELLOW-TIPPED
FLAMES
BURNER FLAMES
VERY LARGE
OR YELLOW
BURNER CONTROL
KNOB WILL NOT
TURN
24
The Problem Solver
POSSIBLE CAUSE
• Electrical plug is not plugged into a live power outlet.
• Gas not turned on.
• Burner parts not replaced correctly.
• Holes in the simmer rings or slits in the burner rings are clogged.
• Clogged orifice, or wet burners or electrodes.
• Burner parts not replaced correctly.
A. Yellow flames: Call for B. Yellow tips on outer cones:
service.
• If burner flames look like (A), call for service. Normal burner flames
should look like (B) or (C), depending on the type of gas.
• If cooktop is connected to LP gas, contact the person who installed
your cooktop or made the conversion.
• When the knob is at the OFF position, it must be pushed in before
it can be turned, and it can only be turned in a counterclockwise
direction. Similarly, when the knob is in the LOW or X-HI
positions, it must also be pushed in to change flame settings.
Stainless Steel Cooktop
C. Soft blue flames: Normal
Normal for LP gas. for natural gas.