Table of Contents
Advertisement
Cleaning and Care (Continued)
5. Detach the glaass #3 from the door
Clean the sheets with warm water or washing-up liquid and polish dry with a soft
clean cloth.
Assembling the door
1. Clean the glass and interior parts with warm soapy water.
Do not use abrasive cleaners or pan scourers. Use a sponge with liquid detergent or
warm soapy water.
2. Attach the glass #3 into position.
3. Attach the two spring brackets at the top of glass #2 and place glass #2 into position.
4. Attach glass #1, the door bracket to the door.
When assembly the inner glass#1, put
printing to direction below.
5. Secure the two screws at both sides of
the door.
Glass #3
43
Glass #1
Glass #1
Printing
EN
Door bracket
Spring bracket
(Right and Left)
Glass #1
Glass #2
Glass #3
Glass #4
Advertisement
Table of Contents
