Advertisement
Available languages
Available languages
16. Lift the table assembly from the floor with at least four strong adults, turn it over, and set the table assembly on
its legs in the location where you play. Go back and make sure that all connections
are tight.
CAUTION:
Four strong adults are recommended
to turn the table over as shown.
1. Lift the table off the ground.
2. Turn the table over.
3. Place
it on all four
feet at the same
time
on the ground.
CABINET
DO NOT
DO NOT LEAN THE
HOLD TABLE
HOLD THE
TABLE ON ITS LEGS!
LEGS
17. Tear off the backside paper of the EVA Pad (#14) and stick them at the bottom of the Table Tennis Surface (#8 and
#9). See FIG. 7.
18. Insert the Plastic Dowel (#35) into the holes on the Table Tennis Surface. See FIG.7A. And assemble the Table
Tennis Surface - A (#8) and Table Tennis Surface - B (#9) together.
9
Advertisement
