ARX EC-1 Owner's Manual

Electronic

Advertisement

Quick Links

INTERNATIONAL LIMITED WARRANTY

ARX Systems (ARX) warrants to the first purchaser of any ARX equipment that it is
free from defects in materials and workmanship under normal use and service. ARX's
sole obligation under this warranty shall be to provide, without charge, parts and
labour necessary to remedy defects, if any, which appear within twelve (12) months
from date of purchase, and for a further twelve (12) months supply parts only.
This is our only warranty. It does not cover finish or appearance items, or if the
equipment has been, in ARX's sole judgement:
•Subjected to misuse, abuse, negligence or accident;
•Repaired, worked on, or altered by persons not authorized by ARX;
•Connected, installed, adjusted or used for a purpose other than that for which
it was designed.
This warranty gives you and us specific legal rights and you may also have other
rights which may apply.
Warranty Service Procedure
Should it become necessary to have your equipment serviced under the terms of
the warranty, please follow these steps:
1.
Call your ARX distributor for a Return Authorization (RA) number;
2.
Carefully repack the unit, in its original packaging where possible,
including a note with a description of the problem, and a copy of the
receipt showing date of purchase. Attach these to the actual unit itself.
Don't forget to write your name and address clearly, and include a phone
number where you can be contacted during normal business hours. Make
it easy for our service technicians to contact you if they have a question.
Also, use plenty of packing material - better to be safe than sorry.
3.
Send the unit freight prepaid to ARX Systems, at the address given you
with your RA number. We will pay the return freight when the serviced
unit is returned to you.
4.
We strongly recommend you insure the package. We can't fix it if it gets
lost! Send it by UPS, Fedex, or any similar service that can track the
package. Parcel Post is not recommended
If Warranty Registration Card is missing, please write to ARX in the country of
purchase, stating model and where purchased, or to ARX, PO Box 15, Cheltenham,
Victoria 3192, Australia.
Or you can Email us at: info@arx.com.au
8
EC-1 and EC-2 Owner's Manual v 1.6CE ©1997 ARX®
EC-1
Electronic
Crossovers
OWNER'S
MANUAL
EC-1 and EC-2 Owner's Manual v 1.6CE ©1997 ARX®
EC-2
&
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EC-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for ARX EC-1

  • Page 1 INTERNATIONAL LIMITED WARRANTY ARX Systems (ARX) warrants to the first purchaser of any ARX equipment that it is free from defects in materials and workmanship under normal use and service. ARX’s EC-1 EC-2 sole obligation under this warranty shall be to provide, without charge, parts and &...
  • Page 2 55013 : 1990, Sections Jack, (XLR on EC-2) 3.2 and 3.5 EN 55020 : 1988, Sections 4.3, 5.4, 6.2, 7.0, 8.0. EC-1 and EC-2 Owner's Manual v 1.6CE ©1997 ARX® EC-1 and EC-2 Owner's Manual v 1.6CE ©1997 ARX®...
  • Page 3 So, for single channel 3 way mode, it’s not enough to just press the switch in on the The ‘semi fixed’ method adopted in the EC-1 and EC-2 avoids all these problems. rear panel! You must set up the filters correctly for 3 way use. The chart in this...
  • Page 4 A switch on the rear panel selects Crossover Point Frequency/Resistor Value Chart either mode. Despite their compact size, the EC-1 and EC-2 are not short of features. All controls are clearly labelled on the front panel for either mode of operation; Low/High Frequency Resistor Value Channel A, Low/High Channel B for 2 way mode, and Low/Mid/High for 3 way.

This manual is also suitable for:

Ec-2

Table of Contents