Download Print this page

ARX EC-2 Owner's Manual

Electronic

Advertisement

Quick Links

INTERNATIONAL LIMITED WARRANTY
ARX Systems (ARX) warrants to the first purchaser of any ARX equipment that it is free
from defects in materials and workmanship under normal use and service. ARX's sole
obligation under this warranty shall be to provide, without charge, parts and labour
necessary to remedy defects, if any, which appear within twelve (12) months from date
of purchase, and for a further twelve (12) months supply parts only.
This is our only warranty. It does not cover finish or appearance items, burned voice
coils, or if the equipment has been, in ARX's sole judgement:
•Subjected to misuse, abuse, negligence or accident;
•Repaired, worked on, or altered by persons not authorized by ARX;
•Connected, installed, adjusted or used for a purpose other than that for which it was
designed. This includes running a speaker system with the ISC leads disconnected, or
with a non-ARX crossover, or with the wrong processor.
This warranty gives you and us specific legal rights and you may also have other rights
which may apply.
Warranty Service Procedure
Should it become necessary to have your equipment serviced under the
terms of the warranty, please follow these steps:
1. Call your ARX distributor for a Return Authorization (RA) number;
2. Carefully repack the unit, in its original packaging where possible,
including a note with a description of the problem, and a copy of
the receipt showing date of purchase. Attach these to the actual unit
itself. Don't forget to write your name and address clearly, and
include a phone number where you can be contacted during
normal business hours. Make it easy for our service technicians to
contact you if they have a question. Also, use plenty of packing
material - better to be safe than sorry.
3. Send the unit freight prepaid to ARX Systems, at the address given
you with your RA number. We will pay the return freight when the
serviced unit is returned to you.
4. We strongly recommend you insure the package. We can't fix it if it
gets lost! Send it by UPS, Fedex, or any similar service that can
track the package. Parcel Post is not recommended
If Warranty Registration Card is missing, please write to ARX in the country of
purchase, stating model and where purchased, or to ARX, PO Box 15, Moorabbin,
Victoria 3189, Australia.
Or you can Email us at: info@arx.com.au
8
EC-2 Owner's Manual v 2.9CE ©2006 ARX®
EC-2
Electronic
Crossover
OWNER'S
MANUAL
ARX Systems Pty Ltd, PO Box 15,
Moorabbin, Victoria 3189, Australia
Phone: (03) 9555 7859 Fax: (03) 9555 6747
International Fax: +61-3 -9555 6747
On the Web: www.arx.com.au
Email: info@arx.com.au
EC-2 Owner's Manual v 2.9CE ©2006 ARX®

Advertisement

loading
Need help?

Need help?

Do you have a question about the EC-2 and is the answer not in the manual?

Questions and answers

Summary of Contents for ARX EC-2

  • Page 1 INTERNATIONAL LIMITED WARRANTY ARX Systems (ARX) warrants to the first purchaser of any ARX equipment that it is free from defects in materials and workmanship under normal use and service. ARX’s sole obligation under this warranty shall be to provide, without charge, parts and labour necessary to remedy defects, if any, which appear within twelve (12) months from date of purchase, and for a further twelve (12) months supply parts only.
  • Page 2 55013 : 1990, Sections 3.2 and 3.5 EN 55020 : 1988, Sections 4.3, 5.4, 6.2, 7.0, 8.0. Complies with Australian Standard AS/N25 1053 EC-2 Owner's Manual v 2.9CE ©2006 ARX® EC-2 Owner's Manual v 2.9CE ©2006 ARX®...
  • Page 3 • High output control for Channel A in 2way mode only The EC-2 sums the Low Outputs of Channel A and B and delivers them to a sepa- • Low output control for Channel B in 2 way mode, and Mid output control rate summed mono output on the rear panel.
  • Page 4 It has 2 modes of operation: as a Stereo 2 way crossover, or a Mono 3 way crossover, with user variable crossover points. A switch on the rear panel selects either mode. Despite its compact size, the EC-2 is not short of features. All controls are clearly Crossover Point Frequency/Resistor Value Chart labelled on the front panel for either mode of operation;...