Apm Configuration; Acpi Apic Support [Enabled]; Eup Ready [Disabled] - Asus MAXIMUS III FORMULA User Manual

3.6.4

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC).
[Disabled]
[Enabled]
3.6.5

EuP Ready [Disabled]

[Disabled]
[Enabled]
�.6.6

APM Configuration

Advanced
APM Configuration
Restore on AC Power Loss
Power On By RTC Alarm
Power On By PCI Devices
Power On By PCIE Devices
Power On By PS/2 Keyboard
Restore On AC Power Loss [Power Off]
[Power Off]
[Power On]
[Last State]
3-30
When set to [Disabled], the system disable the Advanced
Configuration and Power Interface (ACPI) support in the Advanced
Programmable Interrupt Controller (APIC).
When set to [Enabled], the ACPI APIC table pointer is included in
the RSDT pointer list.
Disables the Energy Using Products (EuP) Ready function.
Allows BIOS to switch off some power at S5 state to get system
ready for the EuP requirement. When set to [Enabled], power for
WOL, WO_USB, audio and onboard LEDs will be switched off at
S5 state.
[Power Off]
[Disabled]
[Disabled]
[Disabled]
PS/2 Keyboard [Disabled] [Disabled]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
The system goes into off state after an AC power loss.
The system goes into on state after an AC power loss.
The system goes into either off or on state, whatever the system
state was before the AC power loss.
BIOS SETUP UTILITY
<Enter> to select
whether or not to
restart the system
after AC power loss.
←→ Select Screen
↑↓ Select Item
+- Change Options
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 3: BIOS setup