Magnifying And Searching For Details - BenQ MS619ST User Manual

Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the projector's
HDMI input and the projected picture displays wrong colors, please change the color
space to YUV.
To do this:
1. Press MENU/EXIT and then press
2. Press
color space.
This function is only available when the HDMI-input port is in use.

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
• Using the remote control
1. Press Digital Zoom+/- to display the Zoom bar. Press Digital Zoom+ to magnify
the center of the picture. Press the key repeatedly until the picture size is suitable for
your need.
2. Use the directional arrows ( ,
navigate the picture.
3. To restore the picture to its original size, press AUTO. You can also press Digital
Zoom-. When the key is pressed again, the picture is further reduced until it is
restored to the original size.
• Using the OSD menu
1. Press MENU/EXIT and then press
2. Press
appears.
3. Press
4. To navigate the picture, press MODE/ENTER to switch to the panning mode and
press the directional arrows ( ,
navigate the picture.
5. To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/
out function, and press AUTO to restore the picture to its original size. You can
also press
The picture can only be navigated after it is magnified. You can further magnify the picture while searching for
details.
to highlight Color Space Conversion and press
to highlight Digital Zoom and press MODE/ENTER. The Zoom bar
repeatedly to magnify the picture to a desired size.
repeatedly until it is restored to the original size.
/ until the SOURCE menu is highlighted.
, , ) on the projector or remote control to
/ until the DISPLAY menu is highlighted.
, , ) on the projector or remote control to
/ to select a suitable
Operation 25