Table of Contents
Advertisement
Press the E
key to make an adjustment.
NTER
Press the E
key, then use the C
NTER
use the N
keys (top row of Hot-Keys), or the S
UMERIC
numeric value.
Press M
or C
ENU
ANCEL
Or
Press the P
key to start playback, the displayed Head Point time value will increase from the
LAY
current Head Point position. During this time, press the E
Head Point "On-the-Fly". You may then make fine adjustments using the S
Press E
again to save the setting, or press C
NTER
Press M
or C
ENU
ANCEL
Tail Trim
Use the M
, E
ENU
NTER
Press the E
key to make an adjustment.
NTER
Press the E
key, then use the C
NTER
use the N
keys (top row of Hot-Keys), or the S
UMERIC
numeric value.
Press M
or C
ENU
ANCEL
Note that the S
PACE
Note that for tail trimmed recordings, there is a setting in the Configuration Menu that will
permanently discard audio (to save disk space) when the Tail Point is positioned earlier than 30
seconds from the end-of-file. You may disable this feature by changing the "Tail Trimmed Audio"
menu setting from "Keep Only 1
Or
Press the P
key to start playback, the displayed Tail Point time value will increase from the Pre-
LAY
roll position to the End-of-File. During this time, press the E
Tail Point "On-the-Fly". You may then make fine adjustments using the S
Press E
again to save the setting, or press C
NTER
Press M
or C
ENU
ANCEL
The value of the Pre-roll setting can be adjusted in another Editor menu.
Fade In
Use the M
, E
ENU
NTER
Page 16
ENTER/ADJUST OR PLAY
HEAD
keys to move the cursor to the digit to be adjusted. Then
URSOR
to return to previous menu level, or the S
to return to previous menu level.
, and S
keys to navigate to the Adjust Tail Trim menu.
CROLL
Menu | Editor | Adjust Tail Point
ADJUST TAIL POINT
TAIL
ENTER/ADJUST OR PLAY
TAIL
keys to move the cursor to the digit to be adjusted. Then
URSOR
to return to previous menu level, or the S
key reset will not restore audio discarded by the "Keep Only 1
st
30 Sec" to "Keep All".
to return to previous menu level.
, and S
keys to navigate to the Adjust Fade In menu.
CROLL
Menu | Editor | Adjust Fade In
0_.00
keys to make an adjustment to the
CROLL
key to reset the Head to 0:00.
PACE
key to capture a new value for the
NTER
to revert to the original Head Point.
ANCEL
03.00
0_.00
keys to make an adjustment to the
CROLL
key to reset to the End of File.
PACE
key to capture a new value for the
NTER
to revert to the original Tail Point.
ANCEL
Instant Replay Owner's Manual
and C
keys.
CROLL
URSOR
st
30 Sec." setting.
and C
keys.
CROLL
URSOR
Hide quick links:
Advertisement
Table of Contents
