Effects Page; Note About Restrictions On The Use Of Built-In Effects - Tascam US-1200 Owner's Manual

EFFECTS page

EFFECTS page (Windows)
Make built-in effects settings on this page.
NOTE
The EFFECTS page settings are retained even when the unit
is turned off.
Dynamics effects tabs
1
Click the tab of the dynamics effect that you want to use to
show its settings tab.
Options
COMPRESSOR, NOISE SUPPRESSOR, DE-ESSER, EXCITER,
EQ
For details about each dynamics effect, see "Dynamics
effects" on page 22.
Parameter knobs
2
Use the mouse to click and drag a parameter knob up or
down to adjust it.
The values of adjusted parameters are shown above their
knobs.
For details about each effect parameter, see "Dynamics
effects" on page 22 and "Send effect" on page 24.
Dynamics effect on/off button and indicator
3
Click the name or indicator of the dynamics effect that is
currently being shown to turn it on or off.
When a dynamics effect is on its name lights.
NOTE
• Only one dynamics effect can be used at a time. For this
reason, if you turn on a different dynamics effect, the
dynamics effect that you are currently using will automati-
cally be turned off.
• Turning the dynamics effect on/off on this page is linked to
the dynamics effect on/off setting on the MIXER page.
• Turning it on will not be possible when an effect cannot be
used due to sampling frequency limitations.
Reverb type switch
4
This unit's REVERB effect has five types.
Click the name of a reverb type to use it. The selected reverb
type name will light.
For details about each parameter, see "Send effect" on page
24.
5 – Mixer Panel Settings
Send effect on/off button and indicator
5
Click the name or indicator of the send effect (reverb) that is
currently being shown to turn it on or off.
When the send effect is on, its name lights.
NOTE
• Turning the send effect on/off on this page is linked to the
send effect on/off setting on the MIXER page.
• Turning it on will not be possible when an effect cannot be
used due to sampling frequency limitations.
Note about restrictions on the use of built-in
effects
The number of built-in effects that can be used is restricted
depending on the sampling frequency.
• When the sampling frequency is 44.1 kHz or 48 kHz, one
type of effect (either dynamics or send) can be used.
(Turning an effect on will automatically turn off in any other
effect that is on.)
• When the sampling frequency is 88.2 kHz or 96 kHz, no
effects can be used.
21
TASCAM US-1200