Download Print this page

Tascam US-1200 Release Notes

Hide thumbs Also See for US-1200:

Latest versions and updates

The latest driver and firmware versions for these units are as follows.

Windows

Driver: 1.00rc2

Firmware: 1.00d1 (no new update)

Mac OS X

Driver: 3.01 (Now updated from version 3.00d18)

Firmware: 1.00 d1(no new update)

Always ensure that you are running the latest driver software and firmware by visiting TASCAM's web site (http://tascam.com/).

Whenever updating drivers, previous drivers for this product should be uninstalled first.

Please turn on the unit (US-1200) after the computer is turned on.

For Mac OS X Driver

 Version 3.01

・ A problem where the Meter display on the Mixer panel might stop working when the Mixer Mode was changed has been fixed.

・ A problem where the computer audio would become garbled after the Mixer Mode was changed has been fixed.

・ A problem where turning off the US-1200 while the Mixer panel was active would cause the computer to freeze has been fixed.

D01228420D

US-1200

TASCAM US-1200

Firmware: 1.00d1, Windows Driver: 1.00rc2, Mac OS X Driver: 3.01

Table of Contents

Do you have a question about the US-1200 and is the answer not in the manual?

Page 1 ・ A problem where the computer audio would become garbled after the Mixer Mode was changed has been fixed. ・ A problem where turning off the US-1200 while the Mixer panel was active would cause the computer to freeze has been fixed.
Page 2 US-1200 Checking the driver and firmware versions Check the current versions before beginning to update the US-1200 driver and firmware. 1. Press the MIXER PANEL button on the unit to open the Mixer Panel. 2. Click the “INTERFACE” tab to open the “INTERFACE” page.
Page 3 Windows Driver updating procedures 2. Uncompress the driver zip file on the hard disk. Before beginning installation, disconnect the US-1200 from 3. Double-click the “setup.cmd” file to start installation. the USB cable. Before installing the new driver uninstall any Follow the procedures in the Owner’s Manual to existing driver on the computer.