Table of Contents
Advertisement
Receiver (Rx) Unit – Back Panel
Connect to the remote console and optional 2nd (Remote) computer
Receiver Unit
[Rx – Front Panel]
1. Power LED (ON: Power on / OFF: Power off)
2. Link LED (ON: Link OK / OFF: No Link)
3. PS/2 keyboard connector (6-pin Mini Din)
4. PS/2 mouse connector (6-pin Mini Din)
5. USB keyboard connector (USB Type A)
6. USB keyboard connector (USB Type A)
7. KVM Select Button to switch between Local and Remote
Computers
8. Local Computer LED (ON: Local computer active/Off: nonactive)
9. Remote Computer LED (ON: Remote computer active/Off:
non-active)
[Rx – Back Panel]
10. Power receptacle (DC5V 1.0A, Centre-Positive)
11. CAT5 Extension Port (RJ45, connect to the Transmitter unit
via a CATx UTP cable, 150mtr max.)
12. Computer port (HDB15, connect to the 2nd computer using
5
Advertisement
Table of Contents
