Table of Contents
Advertisement
Transmitter Unit
[Tx – Front Panel]
a. Power LED (ON: Power on / OFF: Power off)
b. Link LED (ON: Link OK / OFF: No Link)
c. PS/2 keyboard connector (6-pin Mini Din)
d. PS/2 mouse connector (6-pin Mini Din)
e. USB keyboard connector (USB Type A)
f. USB keyboard connector (USB Type A)
g. Select Button for Receiver Mode (View Only/Full
Access/Access Deny)
h. Video LED (ON: Video ON)
i. Control LED (ON: Keyboard & Mouse Control ON)
[Tx – Back Panel]
j. Power receptacle (DC5V 1.0A, Centre-Positive)
k. CAT5 Extension Port (RJ45, connect to the Receiver unit via a
CATx UTP cable, 150mtr max.)
l. Computer port (HDB15, connect to the 1st (local) computer
using a special 3-in-1 KVM Combo cable)
m. Upgrade port (USB Type B, dedicated for firmware upgrade)
n. Console Video port (HDB15, connect to monitor)
Receiver (Rx) Unit – Front panel
4
Advertisement
Table of Contents
