Casio CW-50 User Manual page 77

Symptom Possible Cause
G Printing is not
Any of the following can
clear. interfere with proper
G Printing is poor
printing.
• A disc label that is not
quality.
G Printing is too
smooth.
• A disc label that has a
light.
design or lines printed
on it.
• A disc label that
support ink jet printing
only.
Dirty print head
Improper print density
G Printing is
Improper alignment of
the disc in the tray
misaligned.
G Cannot print.
The ink ribbon is used
up.
The driver is not installed
correctly.
G The last part of
Too many characters per
input data does line
not print.
Too many lines
Recommended Action
See the separate
"Printing Precautions"
sheet for information
about recommended
media.
Clean the print head.
(page 73).
Adjust the print density.
(page 70).
Use the alignment guide
when aligning the disc in
the tray (page 69).
Replace the ink ribbon
cassette with a new one
(page 21).
Disconnect the USB
cable and re-install the
software. Installing the
software also installs the
driver. After re-installing,
connect the USB cable
again.
Use a smaller font size
or reduce the number of
characters per line.
Use a smaller font size
or reduce the number of
lines.
Symptom Possible Cause
G Cannot import
The music CD you are
CD-Text. trying to import from
does not have any CD-
Text on it.
Your CD drive does not
support reading of CD-
Text.
G Cannot create a
The specified drive or
data index file. media where you are
trying to save the data is
write protected or full.
Recommended Action
Type text manually into
the label input boxes, or
find a Website on the
Internet that contains the
data you want to include
on the label, copy it, and
then paste it into the label
input boxes.
Remove the write
protection or delete
data you no longer
need to make room
from the data index file.
Other options include
switching to a different
drive or different media.
75